Key takeaways
- Water heating is about a third of household energy use (EECA, via BRANZ Level), so it is the biggest single load solar can take on.
- A thermal solar water heater costs $7,000 to $9,000 installed and covers 50% to 75% of hot water (Solar Scout, Oct 2026). There is no government grant for it now.
- Solar PV with a diverter uses your existing cylinder: surplus solar heats water instead of being exported for a low buy-back rate.
- A heat pump cylinder costs about $7,000 installed and uses roughly a third to a half of the electricity of a standard cylinder (EECA figures, via BRANZ Level and Solar Scout).
- If your cylinder is old, price a heat pump cylinder first; if it is healthy, a diverter on a PV quote is the cheap win.
How much of my power bill is hot water?
About a third. EECA puts water heating at around a third of residential energy use, excluding transport, and MySolarQuotes and Solar Scout both put it at roughly 30% of a typical power bill. That makes the cylinder the biggest single thing solar can pay for in most homes.
A standard electric cylinder is just a big kettle with a thermostat. It reheats whenever the water drops below its set temperature, mostly in the morning and evening when the sun is weak. That timing is the whole problem the three options below try to solve.
What are the three ways to heat water with solar in NZ?
Thermal solar water heating, solar PV with a hot water diverter, and a heat pump cylinder (which pairs well with PV). They differ in cost, in how much of the rest of the house they help, and in what they need from your roof. The table sets them side by side.
| Option | Typical installed cost | What it covers | Roof work |
|---|---|---|---|
| Solar water heater (thermal) | $7,000 – $9,000 | 50 – 75% of hot water, nothing else | Collectors plus plumbing; usually a building consent |
| Solar PV + hot water diverter | PV system price + about $700 to $1,000 for the diverter | Surplus solar into the existing cylinder; the rest powers the house | Panels only |
| Heat pump cylinder | About $7,000 | Cuts the electricity the cylinder needs, solar or not | None |
The pattern: a thermal system is a single-purpose machine, and the other two are general-purpose. When the cylinder is full, a thermal collector has nowhere to send the rest of the day's sun. A PV system just moves on to the fridge, the heat pump and the grid.
How much does a solar water heater cost in NZ?
Solar Scout's October 2026 guide puts installed thermal solar water heating at $7,000 to $9,000, depending on the site and whether the cylinder is replaced at the same time. It covers 50% to 75% of a household's hot water over the year, more in summer and less in winter.
Thermal systems use either flat-plate collectors (glazed panels with water channels) or evacuated tubes (rows of glass vacuum tubes that hold heat better on cold, clear days). In a New Zealand climate the two perform similarly overall; the installer's record matters more than the collector type.
The old government subsidy for solar water heating ended years ago, and MySolarQuotes notes that is partly why these systems became less common as PV prices fell. Because the job involves roof penetrations and plumbing, it usually needs a building consent, unlike most PV installs (see our consent guide).
Can normal solar panels heat my hot water?
Yes, and it is now the common way to do it. A hot water diverter sits between your PV system and your existing electric cylinder. When the panels make more than the house is using, it sends the surplus into the cylinder's element instead of exporting it, so the cylinder works like a thermal battery.
The value is in the gap between two prices. A kWh exported earns a buy-back rate of roughly 8c to 24c, and a kWh you would otherwise buy costs about 40.6c on the 2026 MBIE average. Every kWh the diverter puts into the cylinder is worth the difference. Our buy-back rates guide has the retailer rates.
A simpler version is a timer: set the cylinder to heat in the middle of the day, when the panels are strongest. A diverter does it better because it follows the sun minute by minute, but a timer costs about $200 installed. Our solar diverter guide has prices and a worked saving. Either way, ask for it as a line item on the quote.
Is a heat pump hot water cylinder better than solar?
For many homes it is the bigger saving per dollar. EECA's market research put a heat pump water heater at around $7,000 installed and estimated it can cut water heating energy by half or more. Solar Scout cites EECA running costs of about $480 a year for an electric cylinder and about $180 for a heat pump.
EECA is monitoring about 70 heat pump water heaters in New Zealand homes. Its early findings, published in February 2026, were that they perform well overall, with efficiency highest in warmer climate zones and in households that use a lot of hot water. Product costs ran from $1,900 to $7,800 and installation from $1,600 to $9,500, with integral (all-in-one) units generally cheaper and simpler to fit than split systems.
The trade-offs: a compressor makes some noise, so think about where it sits relative to bedrooms (yours and the neighbours'), and efficiency drops in colder places. A heat pump cylinder and PV also stack: put the heat pump on a daytime timer and it runs on your own solar.
Which option suits my house?
If your cylinder is healthy and you want solar for the whole bill, PV with a diverter. If the cylinder is old or your roof is poor for solar, a heat pump cylinder first and PV later. Thermal solar water heating suits a narrow case: very high hot water use where PV is a poor fit.
- Cylinder healthy, roof good: solar PV with a diverter or a daytime timer. See our packages and the payback calculator.
- Cylinder old, roof good: price a heat pump cylinder and a PV system together; the heat pump shrinks the load the PV has to cover.
- Roof shaded or small: a heat pump cylinder needs no roof at all.
- Big, steady hot water use and limited electrical capacity: this is where thermal collectors still make sense.
- Already have thermal collectors that work: keep them. The case above is about what to buy now, not about ripping out a working system.
Frequently asked questions
How much does solar hot water cost in NZ?
Solar Scout puts an installed thermal solar water heater at $7,000 to $9,000 (October 2026). Solar PV with a diverter costs the PV system plus about $700 to $1,000 for the diverter (see solar diverters in NZ), and a heat pump cylinder is about $7,000 installed.
Is solar hot water worth it in NZ?
The technology works and covers 50% to 75% of hot water, but for similar money PV panels power the whole house including the cylinder, and a heat pump cylinder cuts the cylinder's running cost before the sun is involved. For most homes one of those two is the better buy in 2026.
Are there grants for solar hot water in NZ?
Not now. The old government subsidy for solar water heating ended years ago (MySolarQuotes; Solar Scout). Our grants guide lists what is available for solar in general.
Do I need a new cylinder for solar PV hot water?
No. A diverter feeds your existing electric cylinder's element. Thermal collectors usually need a compatible cylinder, which is part of their installed price.
Does solar water heating need a building consent?
Usually, because it involves roof penetrations and plumbing. Check with your council. Most standard PV installs are now exempt; see our consent guide.
Sources
- Solar Scout, Solar hot water NZ: cost and is it worth it (23 Oct 2026) (checked 23 Oct 2026)
- BRANZ Level news, citing EECA: heat pump water heating (30 Jun 2025) and heat pump water heater study early findings (27 Feb 2026) (checked Oct 2026)
- MySolarQuotes, How to heat water with solar PV, heat pump or element (28 Nov 2023) (checked Oct 2026)
- MySolarQuotes, Solar PV hot water timers vs hot water diverters (8 Aug 2019) (checked 1 Nov 2026)
- Canstar NZ citing MBIE Quarterly Survey of Domestic Electricity Prices to 15 Feb 2026 (checked Feb 2026)
- Powerswitch (Consumer NZ), solar buy-back rates (checked Sept 2026)
General information, not financial advice. Prices and rates change; each figure shows where it came from and when it was checked.